|
NOTE:
Exit lights remain ON for a maximum of 90 seconds after key switch is turned OFF (if road or field lights were used within the previous five minutes). Operator chooses to light left or right side of machine with turn signal lever.
When all lights are first turned to the ON position with key switch OFF, there will be a slight delay before lights turn ON.
-
Dimmer switch (A) controls:
-
Brightness of cornerpost display, CommandCenter display and cab interior lights
-
Beacon/Hazard light switch (B) controls:
-
Beacon lights (middle position)
-
Warning (flashing) lights with beacon lights (top position)
|
-
Four road lights and taillights if engine is running (top position)
Road light switch (C) controls:
-
Warning (flashing) lights
-
Four headlights
Auto Beacon/Field light switch (D) controls:
-
Auto beacon lights (middle position and top position)
-
Grain tank and headlights (top position)
-
Side finder lights with turn signal lever (top position)
-
Unloading auger light when extended (top position)
-
Taillights and warning lights (top position)
Work light switch (E) controls:
-
Stubble lights (middle position)
-
Stubble lights and rear residue lights (top position)
|
