|
IMPORTANT:
Change oil every 100 hours if fuel is more than 0.5 % sulfur.
Fill crankcase with seasonal viscosity grade oil or Torq-Gard Supreme
™
(250 hours change interval). If using Plus-50
™
oil and a John Deere filter, service interval can be extended by 50 percent. Example: 250 Hours extends to 375 Hours.
|
1.
Engine Crank Case Top Load Oil Filter - Remove cap (A) and remove filter. Replace filter and install cap. Tighten cap to specifications.
Specification
|
Oil Filter Cap
-Torque
|
40 N·m
|
(30 lb-ft)
|
2.
Engine Crank Case Top Load Oil - Open drain (B) to remove oil.
|
