|
IMPORTANT:
Inspect seat belt and mounting hardware at least once a year. If seat belt system, including mounting hardware, buckle, belt or retractor, shows any sign of damage or unusual wear, discoloration, or abrasion the entire seat belt should be replaced immediately. For your safety, replace seat belt system with replacement parts approved for your machine. See your John Deere dealer.
3.
Seat Belt - Inspect seat belt for damage.
4.
Air Filter Element - When engine air filter restricted indicator is shown on CommandCenter display,
|
service primary filter. Check precleaner for plugging. Check for leaks and for collapse of aspirator tube. Replace elements if plugged.
 CAUTION:
Dirt, oil, chaff and crop debris in this area is a fire hazard. Direction of wind, type of crop and its moisture content can all have an effect on where and how much chaff and debris accumulate. Do not clean area with engine running.
5.
Multi-Speed Feeder House Drive (Optional) - Remove access door on front side of grain tank and clean material out around gearcase.
|
