Dial-A-Speed Dial (Black)

Dial-A-Speed dial (A) will change speed of reel or belt pickup as determined by operator. Operating speed is a ratio of machine ground speed to reel or belt speed (see Dial-A-Speed System in CommandTouch Cab Cornerpost section).

Turn dial towards plus (+) symbol to increase reel or belt pickup speed and setpoint or towards minus (-) symbol to decrease reel and belt pickup speed and setpoint.

A-Dial-A-Speed Dial

OUO6075,00005E2 -19-19DEC07-1/2

Press Dial-A-Speed button (A) on display to disable automatic adjust system and to allow manual control. Turn Dial-A-Speed dial (B) to manually change speed of reel or belt pickup.

Turn dial towards plus (+) symbol to increase reel or belt pickup speed or towards minus (-) symbol to decrease reel and belt pickup speed.

System is in manual mode when:

• Properly equipped header is connected to machine.
• Engine is running.
• Road transport disconnect switch is in field position.
• Header and separator are engaged.
• Dial-A-Speed is disabled or when machine speed is below 1/4 km/h (0.16 mph).

NOTE: Corn heads with reel attached in down corn will only run in manual mode.

A-Dial-A-Speed Button
B-Dial-A-Speed Dial

OUO6075,00005E2 -19-19DEC07-2/2