Cutterbar Pressure Adjust Switch (Black)

NOTE: Switch only works on HydraFlex equipped platforms.

Cutterbar pressure adjust switch (A) controls the amount of pressure in the cutterbar as determined by operator.

1. Press cutterbar pressure adjust switch.

2. Indicator light (B) will come on indicating setting can be adjusted.

3. Turn selection dial (C) towards plus (+) symbol to increase cutterbar pressure and setpoint or towards minus (-) symbol to decrease cutterbar pressure and setpoint.

4. CommandCenter display will show operator adjustment setting.

H86964


A-Cutterbar Pressure Adjust Switch
B-Indicator Light
C-Selection Dial

OUO6075,00005F6 -19-30MAR07-1/1