Separator Covers

causym CAUTION: Shut OFF engine, set parking brake and remove key.

IMPORTANT: To prevent grain loss make sure separator covers are flush against separator and underneath the edge of separator. Covers are installed starting from the left-hand side, as facing the machine and working to the right.

Do not lay covers in the hot sun or they will become distorted.

Two covers (A) are used on each side of the machine to seal the threshing section. Three covers (A) on each side seal the separating section. Quick-lock pins (B) and spring straps (C) are used to retain covers.

Remove covers by removing quick-lock pins and raise spring straps. Pull shield out to clear retainer brackets.


A-Covers
B-Quick-Lock Pins
C-Spring Straps

H62100
H62143

OUO6075,000073D -19-20MAR07-1/1