Chaffer/Sieve Motor-Manual Adjust (Optional)

CAUTION: Shut OFF engine, set parking brake and remove key to help prevent accidental starting and personal injury.

NOTE: Same manual adjust procedure can be used on the chaffer or sieve motor.

1. Remove cap screws (A) to access motor.

A-Cap Screws

OUO6075,0000773 -19-23APR07-1/2

IMPORTANT: To prevent adjusting motor damage, do not use wrench on knob.

NOTE: Once chaffer or sieve adjusting motor is repaired or replaced, adjusting motor will have to be recalibrated. (See Calibration Procedures section).

2. Use knob (A) to adjust motor. Turn knob clockwise to close and counterclockwise to open chaffer/sieve.

A-Knob

OUO6075,0000773 -19-23APR07-2/2