Chopper Vanes-Adjusting

CAUTION: Shut OFF engine, set parking brake and remove key.

NOTE: If factory vane settings do not produce adequate spread width or even distribution, adjustments can be made to vane settings.

Vanes are factory set for 9.2 m (30 ft.) platforms.

Adjust vanes (A) to control distribution of straw across cut crop.

Loosen nuts (B) and adjust outer vane ends in slots. Tighten nuts.

A-Vanes
B-Nuts

OUO6075,000078B -19-23APR07-1/1