Chopper to Windrow/Servicing Position

CAUTION: Shut OFF engine, set parking brake and remove key.

Raise chopper assembly fully with switch (A) until lock-out pins snap into place.

A-Switch

OUO6075,000088B -19-23APR07-1/2

Release latch (A) and lift shield (B) over pins (C).

Move chopper drive belt (D) on top of belt guard (E), so belt does not turn while chopper is in windrow position.

A-Latch
B-Shield
C-Pins
D-Chopper Drive Belt
E-Belt Guard

OUO6075,000088B -19-23APR07-2/2