Discharge Beater Belt-Replacing

CAUTION: Shut OFF engine, set parking brake and remove key.

Remove cap screw (A) and remove shield (B) from left-hand rear of machine.

A-Cap Screw
B-Shield

OUO6075,000089A -19-23APR07-1/2

Loosen lock nut (A) and remove belt (B).

Install replacement belt and tighten nut (C) until washer (D) is positioned between end of gauge (E) and bottom of step.

Tighten lock nut and install shield.

A-Lock Nut
B-Belt
C-Nut
D-Washer
E-Gauge

OUO6075,000089A -19-23APR07-2/2