Feeder House Top Shaft Stripper-Adjusting

causym CAUTION: Shut OFF engine, set parking brake and remove key.

If top feeder house shaft should wrap, check to see that the strippers are adjusted as follows:

Remove top feeder house door.

Loosen bolts (A) and set stripper (B) to 3 mm (1/8 in.) (C) from top shaft (D).

Specification

Stripper Location -Distance 3 mm (1/8 in.)

Tighten bolts (A) and install top feeder house door.

H59570


A-Bolts
B-Stripper
C-Dimension 3 mm (1/8 in.)
D-Top Shaft

OUO6075,00008B3 -19-09AUG07-1/1