Selection Dial (A):
allows operator to move the "focus" from item to item on the CommandCenter display. As item is highlighted, a "tool tip" will appear describing what the highlighted object is. Selection dial is also used for data entry to increase/decrease numeric values.
Indicator Light (Green) (B) :
indicates that a switch was selected and now can be adjusted to the operator desired position or setting.
Confirm Switch (Green) (C):
allows operator to select desired "focus" area on CommandCenter display or to confirm an action.
Main Menu Switch (Green) (D):
is used to change the active "application" that the CommandCenter display is running. Items or applications, in the menu included:
Combine Settings
On Board Diagnostic Troubleshooting
Display Settings
NOTE:
Display select switch must be activated to navigate between CommandCenter and GreenStar display (if equipped), see your John Deere dealer for further information.
Display Select Switch (Green) (E):
allows operator to change which display the selection dial controls (CommandCenter or GreenStar display (if equipped)).
Cancel Switch (Green) (F):
allows operator to cancel an action on CommandCenter display at anytime.
