Select Yield Wet or Dry and Cut Width Change

From harvesting information icon (A), rotate selection dial (B) until yield wet box (C) or yield dry box (D) is highlighted.

Press confirm switch (E). Highlighted box will display a checkmark indicating which was selected.

  • Yield Wet - shows number of yield units per number of area units at current harvesting conditions.
  • Yield Dry - shows number of yield units per number of area units after taking into consideration the removal of moisture.

Rotate selection dial until cut width adjusting icon (F) is highlighted.

Press confirm switch. Highlighted cut width adjusting icon can now be adjusted to desired cut width.

  • Clockwise increase header cut width.
  • Counterclockwise decreases header cut width.

Press confirm switch to enter desired cut width.

H86338
H86934


A-Harvesting Information Icon
B-Selection Dial
C-Yield Wet Box
D-Yield Dry Box
E-Confirm Switch
F-Cut Width Adjusting Icon

OUO6075,00009C3 -19-27JUN07-1/1