Separator Grate Spacers

Spacers are installed in storage position (as shown) from factory.

Spacers can be used in corn to reduce bits of cob in the grain tank sample and to reduce separator loss.

IMPORTANT: Spacers should be used in corn and soybeans only. Remove spacers for all other crops (place spacers in storage position as shown).

Remove all separator grate spacers (A) from storage position (as shown) and install between separator grates (B) and separator channel (C).

Spacers provide added clearance between tine ends and the separator grates allowing for cleaner grain tank samples and reduce separator loss in corn.

A-Spacers
B-Separator Grates
C-Separator Channel

OUO6075,00009DA -19-19MAR07-1/1