Chopper Controller Bar (Optional)

IMPORTANT: When harvesting corn, controller bar must be removed and placed in storage position. Failure to remove controller bar can result in chaffer element damage.

Controller bar improves cut quality, distribution and spread width in tough straw conditions, see your John Deere dealer for further information.

Remove cap screws and lock nuts (A) from controller bar (B).

A-Cap Screws and Lock Nuts
B-Controller Bar

OUO6075,0000A69 -19-04APR07-1/2

Align controller bar (A) on bottom of chopper floor (B). Retain controller bar with previously removed cap screws and locks nuts (C).

A-Controller Bar
B-Bottom Of Chopper Floor
C-Cap Screws and Lock Nuts

OUO6075,0000A69 -19-04APR07-2/2