|
Harvest Smart Feed Rate varies ground speed to maintain a constant flow of material through machine, maximizing productivity and reducing operator stress. As crop material gets lighter, machine ground speed will increase and as crop material gets heavier machine ground speed will decrease.
Operator limits maximum ground speed at all times by pulling back on multifunction control handle.
System begins to slow machine ground speed when engine
|
rpm drops below 2170 rpm. This helps prevent engine from pulling down and from stalling.
System may not perform optimally if used in the following conditions:
-
Extreme Hilly Conditions
-
Tangled or Lodged Crop Conditions
-
Extremely Muddy Conditions
|