Rotate selection dial until user interface module icon (A) is highlighted and press confirm switch.
Rotate dial until user interface module menu (B) is highlighted and press confirm switch.
IMPORTANT:
Only select 0 131-01-0,XXXXXXX from menu. All others are not recommended.
NOTE:
Changing settings will change what controls the navigation on CommandCenter display and GreenStar display. Changes make certain functions (i.e. selection dial, confirm switch, cancel switch, main menu switch) not work correctly.
Rotate selection dial to select:
Once desired selection is highlighted, press confirm switch.
Rotate selection dial until enter/accept icon (C) is highlighted and press confirm switch.
|
A-User Interface Module Icon
B-User Interface Module Menu
C-Enter/Accept Icon
|