|
Display is blank.
|
No power.
|
Check harness connections at display.
|
|
|
Out of contrast or insufficient backlighting.
|
Adjust contrast.
|
|
|
|
Change backlighting level.
|
|
Display alarm does not sound.
|
Possible failed alarm.
|
See your John Deere dealer.
|
|
Display is locked up on a certain page.
|
Communication problem.
|
Turn key switch OFF and ON.
|
|
Display does not perform monitor or mapping functions.
|
CAN address incorrect.
|
Set CAN address to primary.
|