Adjusting Auger

causym CAUTION: Keep safety shields in place.

1. Both sides of corn head main frame and auger bearing carriers (A) are slotted for adjusting auger. Auger can be adjusted up and down for clearance between auger flighting and floor.

2. Keep auger adjusted down in most conditions. Raise auger to prevent ear damage in popcorn and food grade corn.

3. In normal conditions, keep a minimum of 6 mm (1/4 in.) clearance between auger and the lower adjustable auger stripper.

4. In normal conditions, keep a minimum of 32 mm (1-1/4 in.) clearance between auger flighting and bottom of floor.

5. Bearing carriers can be removed and auger lifted and bolts install to upper slotted holes on each side to raise auger off of floor 76 mm (3 in.) for use in food corn.

H88528


A-Bearing Carriers

OUO6043,0001C8D -19-11JUL08-1/1