Alfalfa / Barley (Feed and Malting) / Beans (Edible) / Canola (Canadian Spring)

NOTE: The following settings for various crops are for average conditions. Varying crop and field conditions may require slightly different settings.

	Alfalfa	Barley (Feed & Malting)
Feeder House Drum Position	Down	Down
Feeder House Conveyor Chain	26 Tooth	26 Tooth 1
Feed Accelerator Speed 2	High	High
Feed Accelerator Wear Strips	Serrated	Serrated
Threshing Speed (rpm)	650—850	700—900
Concave Clearance	0—5	5—20
Concave Type	Small Wire	Small Wire
Fan Speed (rpm)	500—700	650—850
Chaffer Settings	10—20 mm (3/8—3/4 in.)	19—22 mm (3/4—7/8 in.)
Sieve Settings	1—3 mm (1/32—1/8 in.)	6—9 mm (1/4—11/32 in.)
	Beans (Edible)	Canola (Canadian Spring)
Feeder House Drum Position	Down	Down 1
Feeder House Conveyor Chain	22 Tooth 3	26 Tooth
Feed Accelerator Speed 2	Low 4	High
Feed Accelerator Wear Strips	Backswept Serrated	Serrated
Threshing Speed (rpm)	300—350 5	400—700
Concave Clearance	10—30	10—30 6
Concave Type	Round Bar/Large Wire	Small Wire
Fan Speed (rpm)	700—1000	450—700
Chaffer Settings	14—18 mm (9/16—11/16 in.)	10—14 mm (3/8—5/16 in.)
Sieve Settings	6—10 mm (1/4—3/8 in.)	2—4 mm (3/32—3/16 in.)