Alfalfa / Barley (Feed and Malting) / Beans (Edible) / Canola (Canadian Spring)

NOTE: The following settings for various crops are for average conditions. Varying crop and field conditions may require slightly different settings.

	Alfalfa	Barley (Feed & Malting)
Feeder House Drum Position	Down	Down
Feeder House Conveyor Chain	26 Tooth	26 Tooth 1
Feed Accelerator Speed 2	High	High
Feed Accelerator Wear Strips	Serrated	Serrated
Threshing Speed (rpm)	600—800	600—800
Concave Clearance	0—5	5—20
Concave Type	Small Wire	Small Wire
Separator Grate Covers	Use as required 3	Use as required 3
Fan Speed (rpm)	550—700	700—850
Chaffer Settings	10—20 mm (3/8—3/4 in.)	19—22 mm (3/4—7/8 in.)
Sieve Settings	1—3 mm (1/32—1/8 in.)	6—9 mm (1/4—11/32 in.)
	Beans (Edible)	Canola (Canadian Spring)
Feeder House Drum Position	Down	Down
Feeder House Conveyor Chain	22 Tooth 4	26 Tooth 1
Feed Accelerator Speed 2	Low 5	High
Feed Accelerator Wear Strips	Backswept Serrated 6	Serrated
Threshing Speed (rpm)	300—350 7	350—650
Concave Clearance	10—30	10—30 8
Concave Type	Round Bar/Large Wire	Small Wire
Separator Grate Covers	None	Use as required 3
Fan Speed (rpm)	800—1100	500—700
Chaffer Settings	14—18 mm (9/16—11/16 in.)	10—14 mm (3/8—5/16 in.)
Sieve Settings	6—10 mm (1/4—3/8 in.)	2—4 mm (3/32—3/16 in.)