Towing Machine (Mechanical Shift Transmission Machines)

CAUTION: Do not tow machine with wire rope. If rope breaks, the whipping action could cause bodily injury.

Avoid electrical line entanglement. Grain extensions must be lowered and radio antenna lowered before transporting.

Check local governmental regulations regarding driving or towing equipment on public roads. Use auxiliary lights and devices available from your John Deere dealer to warn other roadway users.

Do not tow machine except in an emergency for a short distance at 8 km/h (5 mph). To tow machine, proceed as follows:

• Empty grain tank and remove header.
• Swing unloading auger back. Fold grain tank extensions.
• Swing ladder forward and fold down radio antenna.
• Disengage parking brake.

• CAUTION: Do not remove couplers. When couplers are removed, brakes are disabled.

  Place gearshift lever and multi-function lever in neutral position.
• Tow machine in a forward direction by attaching a chain around main axle. Be certain chain does not damage any hydraulic lines. Have driver in operator’s seat to steer and brake the machine.
• Turn warning lights ON, unless prohibited by law.
• Travel at a safe and reasonable speed, not to exceed 8 km/h (5 mph).

CAUTION: Prevent collisions between other road users, slow moving tractors with attachments or towed equipment, and self-propelled machines on public roads. Frequently check for traffic from the rear, especially in turns, and use hand signals or turn signal lights.

Use headlights, flashing warning lights, and turn signals day and night. Follow local regulations for equipment lighting and marking. Keep lighting and marking visible and in good working order. Replace or repair lighting and marking that are damaged or lost.