Moisture Sensor (If Equipped)

SymptomProblemSolution

Moisture is too high.

Green plant sap or weed seed buildup on moisture sensor plate.

Clean moisture sensor plate.

Moisture is consistently high or low.

Moisture correction needs adjustment.

Change moisture correction.

Moisture does not change or is constantly low.

Obstructed sensor.

Inspect elevator mount unit and clean as needed.

Moisture reading is inaccurate.

Incorrect crop selected.

Select correct crop.
 

Moisture sensor out of adjustment.

Change moisture correction.

Moisture always zero.

Recording problems.

Check if recording status comes ON when harvesting.

OUO6075,0000A75-19-20101103