Standard Feed Accelerator—Wing Replacing

CAUTION: Shut OFF engine, set parking brake and remove key.

NOTE: Wings can be reversed for additional wear.

H85626-UN-27MAR06

Feed Accelerator Wing (Standard)

H85627-UN-27MAR06

Feed Accelerator Wing (Standard)

A - Round Head Bolt(s)

B - Feed Accelerator Wear Strip

C - Cap Screws

D - Feed Accelerator Wings

NOTE: If accelerator is removed from machine, or has been serviced, tighten clamp bolts before securing wings. Tighten cap screws to specification.

Remove round head bolts (A) and replace feed accelerator wear strips (B) as required. Tighten round head bolts to specification.

Item	Measurement	Specification
Feed Accelerator Wear Strip Round Head Bolts	Torque	70 N˙m (52 lb-ft)

Remove cap screws (C) and replace feed accelerator wings (D) as required. Tighten cap screws to specification.

Item	Measurement	Specification
Feed Accelerator Wing Cap Screws	Torque	70 N˙m (52 lb-ft)