Operating Speeds (S680 and S690)

Speeds shown are average and can vary from machine to machine.

NOTE: Operating speed specifications and design subject to change without notice.

Engine Speeds	(13.5 L Tier 2/Stage II) Engine	(13.5 L Interim Tier 4/Stage III B) Engine
Slow Idle (Separator Off)	1200 rpm	1200 rpm
Mid Speed (Separator Off)	1690 rpm	1690 rpm
Fast Idle (Separator Off)	2240 rpm	2240 rpm
Full Load Rated Speed	2100 rpm	2100 rpm

Separator Drive Shaft Speed

1466 rpm

Main Countershaft Speed

1466 rpm

Separator Speeds
High Range	400 - 1000 rpm
Low Range	210 - 530 rpm

Tailings System Speed

880 rpm

Feeder House Lower Shaft Speeds
Fixed Speed	490 rpm
Multi-Speed	1st Gear: 490 rpm, 2nd Gear: 550 rpm, 3rd Gear: 600 rpm, 4th Gear: 670 rpm, 5th Gear: 750 rpm

Feed Accelerator Speeds
Feed Accelerator (Standard Speed)	430/780 rpm
Feed Accelerator (Optional Slow Speed)	310/770 rpm
Feed Accelerator (High Speed High Capacity)	520/970 rpm

Discharge Beater Speed

995 rpm

Jackshaft Speeds
Front Right-Hand Jackshaft	520 rpm
Rear Right-Hand Jackshaft	520 rpm

Cleaning Fan Speeds
Standard Speed	620 - 1350 rpm
Special Slow Speed	250 - 500 rpm

Elevator Speeds	S680	S690
Clean Grain Elevator	415 rpm	460 rpm
Clean Grain Loading Auger	450 rpm	500 rpm
Tailings Elevator, Lower Auger	490 rpm
Tailings Elevator, Upper Auger	580 rpm
Shoe Drive	300 rpm
Conveyor Augers	425 rpm

Unloading System Speeds (Separator Engaged)
Unloading System Countershaft	1005 rpm
Unloading Auger Gearbox, Input Shaft	460 rpm 134 L/sec. (3.8 bu./sec.) Unload Rate
Unloading Vertical Auger	460 rpm 134 L/sec. (3.8 bu./sec.) Unload Rate
Unloading Outer Auger	460 rpm 134 L/sec. (3.8 bu./sec.) Unload Rate
Grain Tank Horizontal Augers (Front and Rear)	450 rpm 134 L/sec. (3.8 bu./sec.) Unload Rate

Chopper Speeds (Deluxe Residue)
Chopper/Discharge Beater Jackshaft	1880 rpm
Chopper (Two Speed)	1500/2350 rpm

Chopper Speeds (Premium Residue)
Chopper/Discharge Beater Jackshaft	2045 rpm
Chopper (Two Speed)	1400/2995 rpm
Overshot Beater	995 rpm