Front and Rear Tire Information

It will be necessary to recalibrate system if tires or final drives are changed from what was originally shipped from the factory. Verify that correct tire code is entered into memory.

IMPORTANT: When changing drive wheels, tire radius may also change. CAB control unit MUST be set to new tire radius. See your John Deere dealer for further information.

Failure to calibrate system will result in inaccurate Harvest Monitor Yields.

For additional information shown below on front and rear tires, see your John Deere dealer for further information.

Front Tires:

• Tire Sizes
• Header Compatibility
• Row Spacings
• Wheel Spacers
• Axle Spacers
• Wheel Offsets

Rear Tires:

• Tire Sizes
• Axle Types
• Spindle Types
• Axle Positions
• Front to Rear Height Differences