Harvest Smart Feed Rate Limp Mode and Emergency Modes

Limp Mode

NOTE: ALLOWS MACHINE TO OPERATE UP TO FOUR HOURS. NOT TO BE USED FOR NORMAL OPERATION. Call your John Deere dealer to have machine inspected immediately.

Use LIMP mode to allow machine to move temporarily.

Press main menu icon or switch.

Touch or press confirm switch when message center icon is highlighted.

Touch or press confirm switch when diagnostic address icon is highlighted.

NOTE: Touch or press confirm switch when down arrow is highlighted to scroll through listing.

Touch or press confirm switch when device drop down menu is highlighted.

Touch or press confirm switch when VCM controller is highlighted in menu listing.

Touch or press confirm switch when down arrow is highlighted.

Touch or press confirm switch when address 103 is highlighted in menu listing.

Touch or press confirm switch when enter/accept icon is highlighted.

NOTE: Change 0 to 1 to enable limp mode.

Touch or press confirm switch when digit one is highlighted.

• 0= Disabled
• 1= Enabled

Touch or press confirm switch when enter/accept icon is highlighted.

Touch or press confirm switch when enter/accept icon is highlighted to save address value.

Press main menu icon or switch.

Touch or press confirm switch when combine main page icon is highlighted.

Emergency Mode

NOTE: MOVES MACHINE FOR 30 SECONDS. NOT TO BE USED FOR NORMAL OPERATION. Call your John Deere dealer to have machine inspected immediately.

Use EMERGENCY mode to move machine out of the way.

Press main menu icon or switch.

Touch or press confirm switch when message center icon is highlighted.

Touch or press confirm switch when diagnostic address icon is highlighted.

NOTE: Touch or press confirm switch when down arrow is highlighted to scroll through listing.

Touch or press confirm switch when device drop down menu is highlighted.

Non ProDrive Machines: Touch or press confirm switch when VCM controller is highlighted in menu listing.

ProDrive Machines: Touch or press confirm switch when PTP controller is highlighted in menu listing.

Touch or press confirm switch when down arrow is highlighted.

Non ProDrive Machines: Touch or press confirm switch when address 102 is highlighted in menu listing.

ProDrive Machines: Touch or press confirm switch when address 119 is highlighted in menu listing.

Touch or press confirm switch when enter/accept icon is highlighted.

NOTE: Change 0 to 1 to enable emergency mode.

Touch or press confirm switch when digit one is highlighted.

• 0= Disabled
• 1= Enabled

Touch or press confirm switch when enter/accept icon is highlighted.

Touch or press confirm switch when enter/accept icon is highlighted to save address value.

Press main menu icon or switch.

Touch or press confirm switch when combine main page icon is highlighted.