Foreword

N103723-UN-08MAY13
READ THIS MANUAL carefully to learn how to operate and service
your machine correctly. Failure to do so could result in personal
injury or equipment damage. This manual and safety signs on your machine
may also be available in other languages. (See your John Deere dealer
to order.)
THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine
and should remain with the machine when you sell it.
MEASUREMENTS in this manual are given in both metric and customary
U.S. unit equivalents. Use only correct replacement parts and fasteners.
Metric and inch fasteners may require a specific metric or inch wrench.
RIGHT-HAND AND LEFT-HAND sides are determined by facing in the
direction of forward travel.
WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Specification
or Identification Numbers section. Accurately record all the numbers
to help in tracing the machine should it be stolen. Your dealer also
needs these numbers when you order parts. File the identification
numbers in a secure place off the machine.
WARRANTY is provided as part of John Deere's support program
for customers who operate and maintain their equipment as described
in this manual. The warranty is explained on the warranty certificate
or statement which you should have received from your dealer.
This warranty provides you the assurance that John Deere will
back its products where defects appear within the warranty period.
In some circumstances, John Deere also provides field improvements,
often without charge to the customer, even if the product is out of
warranty. Should the equipment be abused, or modified to change its
performance beyond the original factory specifications, the warranty
will become void and field improvements may be denied. Setting fuel
delivery above specifications or otherwise overpowering machines will
result in such action. Installing unauthorized dry spreader box, or
modifying John Deere authorized box to exceed design weight limitations
will also void warranty.
THIS SELF-PROPELLED SPRAYER/SPREADER has been specifically constructed
for the application of crop protection chemicals and liquid / dry
fertilizers in ground cultivation and agriculture (”Intended
Use”). The application of crop protection chemicals and liquid
/ dry fertilizers must be done according to the manufacturers’
instruction and legal user regulations. Intended Use also implies
the observance of all user and maintenance instructions prescribed
by the manufacturer. Any other use is regarded as noncompliant with
its purpose including:
-
improper use of agrochemicals (herbicides, fungicides, insecticides,
growth regulators) and liquid fertilizers
-
R4030 and R4038 when equipped with dry spreader box are not
intended for the spreading of agricultural limestone
-
noncompliance with instructions issued by the manufacturers
of fertilizers and crop protection chemicals
-
noncompliance with legal requirements applicable to the use
of fertilizers and crop protection chemicals including their combination
with other chemicals
THIS SELF-PROPELLED SPRAYER/SPREADER MUST ONLY be used and serviced
by authorized persons who are informed about the hazards and correct
operation of the machine. The relevant safety regulations and all
other generally accepted safety, technical, medical and traffic instructions
must be observed.
THE TIRE MANUFACTURER'S warranty supplied with your machine
may not apply outside the U.S.
If you are not the original owner of this machine, it is in
your interest to contact your local John Deere dealer to inform them
of this unit's serial number. This will help John Deere notify you
of any issues or product improvements.
|
|
CS12167,00002E6-19-20130611
|
|