BoomTrac Pro System Status

N103025-UN-26MAR13

Operator In Seat (A)— Shows status of the seat switch.

Resume Switch 1 Button Status (B)— Shows if the resume button on the multifunction control handle as failed.

Sensor Positions Calibrated (C)— Shows if the sensor positions have been calibrated on machine.

Transmission In Field Range (D)— Tells operator that BoomTrac Pro will function as long as in field range.

Roll Sensor (E)— Tells operator that the roll sensor is within normal range.

Boom Fold Sensors Calibrated (F)— Shows if the boom fold sensors have been calibrated on machine.

Section Status (G)— This row of boxes indicate if the individual boom sections are capable of being controlled. If there is an "X" present then that section is not capable of being controlled by BoomTrac Pro.

Boom Unfolded (H)— Indicates the status of the inner fold sensors. An inner wing that is not unfolded completely will keep BoomTrac Pro from operating.

Sensor Available For Control (I)— Gives the status that there is at least one functioning sensor available on each boom section for control.

Select “Enter button (J) to return to setup page.