Connect Load Command—If Equipped

1. NOTE:

   
   N109338-UN-20JAN14

   
   N109339-UN-20JAN14

   A - Clamp

   B - Tank Fill Hose

   C - Load Command Pump

   D - Cap Screw

   E - Bracket

   Clean all connection points before removing caps and plugs to prevent contamination.

   Connect tank fill hose (B) to Load Command pump (C) using clamp (A) and gasket.

---




2. Position bracket (E) as shown and retain with cap screw (D).

3. 
   N109340-UN-20JAN14

   
   N109493-UN-20JAN14

   A - Clamp

   B - Evacuation Hose

   C - Clamp

   D - Rinse Hose

   Connect evacuation hose (B) using clamp (A) and gasket.

---




4. Connect rinse hose (D) using clamp (C) and gasket.

5. 
   N109495-UN-20JAN14

   A - Hydraulic Hose

   Connect hydraulic hose (A).

---