Fill Solution Tank Without Using Quik-Fill

CAUTION:

N99948
N99948-UN-17SEP12

A - Solution Tank Lid

Read carefully the directions printed on the chemical manufacturer's labels before handling chemicals or you may be exposed to hazardous materials which could poison and injure you.

You must not enter the tank for cleaning or repair!

IMPORTANT: Do not add chemical to tank until just before field use. Follow the chemical manufacturer's instructions for mixing the spray solution to obtain the desired application rate and effect.

Instructions on the manufacturer's container label, regarding mixing proportions, should be read and strictly followed. The concentrate should not be poured into the empty tank.

Use following procedure to fill solution tank through solution tank lid:

  1. Open solution tank lid (A).

  2. NOTE: User must monitor solution tank content volume using sight gauge to prevent overfilling solution tank.

    Fill tank about half full with clean, clear water or other base liquid.

  3. Add chemical concentrate.

  4. Finish filling tank with water or base liquid.

Keep spray material away from skin. If spray material comes in contact with the body, wash it off immediately with clean water and detergent.

CS12167,000054F-19-20140203