Operate Front Fill Air Purge

1. CAUTION: Read carefully the directions printed on the chemical manufacturer's labels before handling chemicals or you may be exposed to hazardous materials which could poison and injure you.

   IMPORTANT: Do not add chemical to tank until just before field use. Follow the chemical manufacturer's instructions for mixing the spray solution to obtain the desired application rate and effect.

   CAUTION: Quik-Fill valve (A) can contain hazardous materials which can poison causing serious injury or death to you or others. Before purging, make sure Quik-Fill valve is turned off.

   
   N98880-UN-16MAY13

   A - Quik-Fill Valve

   B - Switch

   C - Air Purge Valve

   Verify Quik-Fill valve (A) is closed.

---




2. Move switch (B) to OFF position to close front fill isolation valve.

3. NOTE: Front fill hose will be pressurized until solution is purged to tank.

   Open front fill air purge valve (C) and wait ten seconds.

4. Close front fill air purge valve.