Tuning in to a Station

There are two possible ways to tune in to a station:

• Automatic seek, using the ◄ and ► keys.
• Manual station tuning using the ▴ and ▾ keys.

Additionally see “Programming the Key Function (KEY PRG)” in this Section.

Automatic seek

Setting sensitivity of seek function (SENS)

1. Select the radio mode.
2. Press the MENU key to open the menu.
3. Press the MENU key several times until SENS and the current setting LO (low sensitivity) or DX (high sensitivity) is displayed.
4. Turn the volume control counterclockwise or clockwise to change from LO to DX or vice versa.
5. Press the MENU key several times to exit the menu.