Store Station

Region:	Wave bands:
	FM	AM	WX	MW	LW
NAFTA countries	X	X	X
Europe	X			X	X
Other Regions	X	X
Memory levels:	FM1, FM2	AM	WX	MW	LW

Manual storing

1. Select the desired memory level or wave band.
2. Tune desired station.
3. Select one of station keys 1 - 6 for storing the station, then press and hold this key for more than 2 seconds.
4. A confirmation signal sounds as soon as the station has been saved on the selected station key. The storage location (e.g. P3) of the station is displayed as long as this station is selected.

Automatic storing (T-STORE)

NOTE: Not available with CommandCenter™ GS 4600 display.

The strongest 6 stations of the region can be stored automatically. For the FM wave band, FMT memory level is used for storing and for the AM wave band, AMT memory level (additionally MWT and LWT for Europe).

NOTE: Stations already stored on this level are replaced by newly found stations.

If PTY is turned on, only stations with the currently selected program type are stored.

1. Select the desired wave band.
2. Press and hold the BND key for more than 2 seconds.
3. Storing starts and T-STORE is displayed. After the process is completed, memory locations 1 - 6 are assigned to the stations. This storing is valid only on the memory level on which the storing was performed (FMT or AMT).