|
Display elapsed or remaining playing time ..............
|
Press the 6 key in the key block to
change between the display of the elapsed (ELAPSED) and the remaining
(REMAIN) playing time of the current track.
|
|
Select track ..............
|
Press the ► key or the ◄ key to select the next or the previous track.
If the current track is already playing for more than 10 seconds,
it will be restarted when the ◄ key is pressed
once.
|
|
Quick scan (audible) ..............
|
Press the ◄ key or the ► key to start scanning up or down. Release the
key when the desired point is found.
|
|
Random playback (MIX ALL) ..............
|
Press the 3 key in the key block.
MIX ALL is briefly displayed, then MIX is displayed. The following tracks are selected
at random.
|
|
Stop MIX ..............
|
Press the 3 key in the key block again.
MIX OFF is briefly displayed, then MIX is no longer displayed. Playback will continue
normally.
|
|
Scan tracks (SCAN TRK) ..............
|
Press the 4 key in the key block to
play all tracks for approx. 10 seconds, each.
SCAN TRK is briefly displayed.
|
|
Stop scan, continue playing track ..............
|
Press the 4 key in the key block again
to stop the scanning process.
SCAN OFF is briefly displayed. Playing
of the current track continues.
|
|
Repeat track (RPT TRK)..............
|
Press the 2 key in the key block.
RPT TRK is briefly displayed, then RPT is displayed. The current track is repeated
until RPT is deactivated.
|
|
Stop RPT ..............
|
Press the 2 key in the key block again.
RPT OFF is briefly displayed, then RPT is no longer displayed. Playback will continue
normally.
|
|
Playback tracks from playlist ..............
|
If a playlist has been compiled and saved in the root directory,
it can be played in the PLST mode.
Press and hold the TA key until PLST ON is displayed. Playback of the first track
of the playlist is started after 2 seconds.
If several playlist are available (all in the root directory),
select the desired playlist using the arrow keys ▴ and ▾.
If no playlists are stored on the data carrier, NO PLST is displayed when the TA key is pressed and held.
|
|
While in PLST mode, it is not possible to access other directories.
The PLST mode must be turned off to change directories.
Press and hold the TA key until PLST OFF is displayed. Playback of the first track
of the first directory is started after 2 seconds.
|
|
Pause playback (PAUSE) ..............
|
Press the 1 key in the key block. PAUSE is displayed.
|
|
Cancel pause ..............
|
Press the 1 key in the key block again.
Playback will continue.
|