Connect USB Data Carrier and Start MP3 Mode

To be able to connect a USB data carrier (e.g. USB stick or USB drive), the USB cable must be connected to the external USB port (see also the Operator's Manual of the vehicle).

CAUTION: By design, some USB data carriers are not suitable for direct connection to the USB port. To prevent personal injury, USB data carriers should only be used with an additional connection cable.

Connect the USB data carrier to the USB cable. As soon as connected, USB data carrier can be selected by pressing the SRC 12 key. USB is then displayed.

Display elapsed or remaining playing time

Press the 6 key in the key block to change between the display of the elapsed (ELAPSED) and the remaining (REMAIN) playing time of the current track.

Track information display (ID3 Tags)

If the audio files contains ID3 tags, the relevant information is displayed once as scrolling text at the beginning of each track. If the audio file does not contain ID3 tags, only the file name is displayed.

NOTE: See also the relevant description of the PC MP3 software or the burner software to create ID3 tags.

Press the 5 key to display the track information once as scrolling text. The ID3 tags of the current track are displayed once as scrolling text.

NOTE: This function is not available if the track information display as scrolling text is turned off. See Turn Track Information Display as Scrolling Text On/Off (SCRL).