|
Select directory..............
|
Press the ▴ key or the ▾ key to change up or down to a different
directory. This way, sub-directories can also be accessed. Directories
of the data carrier that do not contain valid audio files are skipped.
|
|
Select track ..............
|
Press the ► key or the ◄ key to select the next or the previous track.
If the current track is already playing for more than 10 seconds,
it will be restarted when the ◄ key is pressed
once.
|
|
Quick scan (audible) ..............
|
Press the ◄ key or the ► key to start scanning up or down. Release the
key when the desired point is found.
|
|
Random playback (MIX ALL) (all tracks
on the data carrier)..............
|
Press the 3 key in the key block several
times until MIX ALL is displayed.
MIX is displayed and all tracks of
the MP3 data carrier are played back in
random order.
|
|
Random playback (MIX DIR) (all tracks
of the directory or folder)..............
|
Press the 3 key in the key block several
times until MIX DIR is displayed.
MIX is displayed and all tracks of
the MP3 directory are played back in random
order.
|
|
Stop MIX ..............
|
Press the 3 key in the key block again.
MIX OFF is briefly displayed, then MIX is no longer displayed. Playback will continue
normally.
|
|
Scan tracks (SCAN TRK) (all tracks
on the data carrier)..............
|
Play all tracks of the MP3 data carrier in ascending order for
approx. 10 seconds each: Press the 4 key
in the key block several times until SCAN TRK is displayed.
|
|
Scan tracks (SCAN FLD) (all tracks
of the directory or folder)..............
|
Play all tracks of the MP3 directory in ascending order for
approx. 10 seconds each: Press the 4 key
in the key block several times until SCAN FLD is displayed.
|
|
Stop scan, continue playing track..............
|
Press the 4 key in the key block again
to stop the scanning process.
SCAN OFF is briefly displayed. Playing
of the current track continues.
|
|
Repeat track (RPT TRK)..............
|
Press the 2 key in the key block.
RPT TRK is briefly displayed, then RPT is displayed. The current track is repeated
until RPT is deactivated.
|
|
Repeat directory (RPT DIR)..............
|
Press the 2 key in the key block.
RPT DIR is briefly displayed, then RPT is displayed. The current directory is repeated
until RPT is deactivated.
|
|
Stop RPT ..............
|
Press the 2 key in the key block again.
RPT OFF is briefly displayed, then RPT is no longer displayed. Playback will continue
normally.
|
|
Playback tracks from playlist..............
|
If a playlist has been compiled and saved in the root directory,
it can be played in the PLST mode.
Press and hold the TA key until PLST ON is displayed. Playback of the first track
of the playlist is started after 2 seconds.
If several playlist are available (all in the root directory),
select the desired playlist using the arrow keys ▴ and ▾.
If no playlists are stored on the data carrier, NO PLST is displayed when the TA key is pressed and held.
|
|
While in PLST mode, it is not possible to access other directories.
The PLST mode must be turned off to change directories.
Press and hold the TA key until PLST OFF is displayed. Playback of the first track
of the first directory is started after 2 seconds.
|
|
Pause playback (PAUSE) ..............
|
Press the 1 key in the key block. PAUSE is displayed.
|
|
Cancel pause ..............
|
Press the 1 key in the key block.
Playback will continue.
|