Select Connection Type (CON-TYPE) and Pair Devices (BT-PAIR)

Bluetooth® phone and Bluetooth® audio can be used with this radio system. The selection is done in the CON-TYPE menu.

NOTE: CON-TYPE is only displayed when Bluetooth® is turned on (BT ON).

Select connection type (CON-TYPE)

1. Press the MENU key to open the menu.
2. Press the MENU key several times until CON-TYPE is displayed. Wait for 2 seconds until the submenu BT PHONE or BT AUDIO is displayed.
3. Turn the volume control counterclockwise or clockwise to select BT PHONE or BT AUDIO.
4. Press the MENU key to open the subsequent BT PAIR menu or press the TA key to cancel.

Pair Bluetooth® devices (BT-PAIR)

1. Press the MENU key to open the menu.
2. Press the MENU key several times until BT PAIR is displayed. Wait for 2 seconds until the submenu VISIBLE or BT AUDIO is displayed. After 2 more seconds, PIN XXXX is displayed (XXXX represents an individual sequence of numbers).
3. On the cell phone, select New Device or BOSCH BT (if already set up) and start the connectivity search. As soon as the cell phone has established the connection, you are prompted to enter the PIN.
4. Now, enter the numbers (XXXX) displayed on the radio into the cell phone and confirm, if required.
5. If pairing was successful, the Bluetooth® symbol and PAIRED is displayed; then after 2 seconds BT JOIN followed by the contact name of the paired cell phone is displayed.
6. NOTE: If pairing was not successful, NO PAIR is displayed and the radio system immediately returns to the previous mode. A new pairing attempt can be started.
   
7. The contact name is displayed for 10 seconds and then the radio system returns to mode selected prior to the pairing.