Error Messages and Malfunctions

Radios of the “First Edition” (display with dark text on light background)

Error messages during satellite reception (North America only):
SATUPDAT	Updating of encryption code
NOSIGNAL	No signal or signal too weak. This error message is displayed until the signal becomes strong enough.
LOADSGNL	Decoding of audio signal not successful; change the channel.
OFF AIR	Selected channel does not broadcast; change the channel.
NOTAVAIL	Selected channel no longer available; the radio system automatically changes to the previous channel.
NO INFO	No artist or track information; the message is displayed until the relevant information is received.
SAT FAIL	XM receiver failure.

Malfunctions:
Radio switches to frequencies on which no station in the region is broadcasting.	The receiver has to be set to the frequency band available in the region. Visit a John Deere™ dealer to get the radio set to the correct frequency band.
AUX audio source not available.	The AUX source is only displayed if an input device is connected to the respective port. In the event of problems, check plugs and cables and switch on the input device.
Speech sound quality bad when using a Bluetooth® hands-free unit.	Make sure the air louvers are not directing the air of the fan towards the microphone. Battery power of the phone too low, connect charger cable.
Message BLOCKED	No audio playback possible. The radio has been locked to prevent unauthorized use (“anti-theft” is active). Visit a John Deere™ dealer to get the radio unlocked.

Radios of the “Second Edition” (display with light text on dark background)

Error messages during satellite reception (North America only):
SATUPDAT	Updating of encryption code
NO SIGNL	No signal or signal too weak. This error message is displayed until the signal becomes strong enough.
LOAD SIGNL	Decoding of audio signal not successful; change the channel.
OFF AIR	Selected channel does not broadcast; change the channel.
CH UNAVL	Selected channel no longer available; the radio system automatically changes to the previous channel.
— — —	No artist or track information; the message is displayed until the relevant information is received.

Malfunctions:
Radio switches to frequencies on which no station in the region is broadcasting.	The receiver has to be set to the frequency band available in the region. Visit a John Deere™ dealer to get the radio set to the correct frequency band.
AUX audio source not available.	The AUX source is only displayed if an input device is connected to the respective port. In the event of problems, check plugs and cables and switch on the input device.
Speech sound quality bad when using a Bluetooth® hands-free unit.	Make sure the air louvers are not directing the air of the fan towards the microphone. Battery power of the phone too low, connect charger cable.
Message BLOCKED	No audio playback possible. The radio has been locked to prevent unauthorized use (“anti-theft” is active). Visit a John Deere™ dealer to get the radio unlocked.