Machine Specification

Item	Specification
ENGINE—R4030
Type	Diesel
Manufacturer	John Deere
Model—Final Tier 4/Stage IV	PowerTech™ PSS 6.8 L
Model—Tier 2/Stage II	6068H Turbocharged
Number of Cylinders	In-line 6
Bore and Stroke	106.5 x 127.0 mm (4.19 in. x 5.00 in.)
Displacement	6.8 L (415 cu. in.)
R4030 Horsepower1	209 kW (280 hp.)
Compression Ratio	17.0:1
Firing Order	1-5-3-6-2-4
Type of Fuel	No. 1-D, 2-D, or B2 Diesel
Fuel System	High Pressure Common Rail (HPCR)
Air Cleaner	Dry-Type Dual Element
Engine Speeds
Slow Idle	900 rpm
Fast Idle (No load)	2450 rpm
ENGINE—R4038 and R4045
Type	Diesel
Manufacturer	John Deere
Model—Final Tier 4/Stage IV	PowerTech™ PSS 9.0 L
Model—Tier 2/Stage II	6090H Turbocharged
Number of Cylinders	In-line 6
Bore and Stroke	118 x 136 mm (4.66 in. x 5.35 in.)
Displacement	9.0 L (549 cu. in.)
R4038 Horsepower1	231 kW (310 hp.)
R4045 Horsepower1	257 kW (345 hp.)
Compression Ratio	16.0:1
Firing Order	1-5-3-6-2-4
Type of Fuel	No. 1-D, 2-D, or B2 Diesel
Fuel System	High Pressure Common Rail (HPCR)
Air Cleaner	Dry-Type Dual Element
Engine Speeds
Slow Idle	900 rpm
Fast Idle (No load)	2250 rpm

ENGINE COOLING SYSTEM
Type	Pressurized
Pressure	69 kPa (0.7 bar) (10 psi)
Thermostat	Two Heavy-Duty 180°

ENGINE LUBRICATION
Oil Filter	Full Flow
Type—R4030	Spin-on
Type—R4038 and R4045	Top Load Element
Protection	Bypass Valve

DRIVE SYSTEM
Type	Hydrostatic Drive, Tandem Pumps, Four Variable Displacement Motors, Gear Reduction Hubs, and Electro-Hydraulic Shift

BRAKES
Front/Dynamic Brakes	Hydraulic Pressure Applied Caliper Disk Brakes
All Wheels/Park Brakes	Hydraulic Release Park Brake

PLANETARY HUBS
Type	Planetary Gear Reduction Hubs
Lubrication	Oil Bath
R4030 Gear Ratio	30.1:1
R4038 and R4045 Gear Ratio	26.6:1

IMPORTANT: Installing tires that do not meet original equipment tire specifications may cause machine malfunction. Consult your dealer or tire supplier for guidance. Use of substandard tires or larger than recommended tires will void warranty and may decrease stability, affect steering, result in premature tire failure, or cause other durability or safety issues.

GROUND SPEED (Rated Engine Speed at 2450 rpm-No Load)
R4030
Speed Range (Field) w/Wet System	0—32 km/h (0—20 mph)
Speed Range (Field) w/Dry Spreader System	0—32 km/h (0—20 mph)
Speed Range (Transport)	0—50 km/h (0—31 mph) EU/Russia/CU countries 0—40 km/h (0—24.8 mph)
R4038 and R4045
Speed Range (Field) w/Wet System	0—40 km/h (0—25 mph)
Speed Range (Field) w/Dry Spreader System	0—40 km/h (0—25 mph)
Speed Range (Transport)	0—56 km/h (0—35 mph) EU/Russia/CU countries 0—40 km/h (0—24.8 mph)

TIRES
AIR PRESSURE—R4030
Tire Size	Wet System				Dry System
	27.4 /30.4 M (90/100 ft.) without Direct Injection (DI)	27.4 /30.4 M (90/100 ft.) with Direct Injection	36.5 M (120 ft.) without DI	36.5 M (120 ft.) with DI	200 cu. ft. Spreader	300 cu. ft. Spreader
IF320/90R50 - 161D2	441 kPa (64 psi)	441 kPa (64 psi)	441 kPa (64 psi)	441 kPa (64 psi)	441 kPa (64 psi)	Not applicable
IF320/105R46 - 166D	421 kPa (61 psi)	441 kPa (64 psi)	441 kPa (64 psi)	462 kPa (67 psi)	421 kPa (61 psi)	Not applicable

VF380/90R46 - 173D

248 kPa (36 psi)

283 kPa (41 psi)

283 kPa (41 psi)

303 kPa (44 psi)

248 kPa (36 psi)

Not applicable

IF380/90R46 - 168D

338 kPa (49 psi)

379 kPa (55 psi)

379 kPa (55 psi)

400 kPa (58 psi)

338 kPa (49 psi)

Not applicable

380/90R46 - Hi Capacity - 168A8/B

427 kPa (62 psi)

441 kPa (64 psi)

441 kPa (64 psi)

462 kPa (67 psi)

462 kPa (67 psi)

Not applicable

380/90R46 - Standard Capacity - 163A8/B

427 kPa (62 psi)

441 kPa (64 psi)

441 kPa (64 psi)

462 kPa (67 psi)

462 kPa (67 psi)

Not applicable

IF420/80R46 - 167D

303 kPa (44 psi)

338 kPa (49 psi)

338 kPa (49 psi)

358 kPa (52 psi)

303 kPa (44 psi)

Not applicable

520/85R38 - 169A8/B

248 kPa (36 psi)

269 kPa (39 psi)

269 kPa (39 psi)

289 kPa (42 psi)

276 kPa (40 psi)

Not applicable

620/70R38 - 170A8/B

207 kPa (30 psi)

221 kPa (32 psi)

221 kPa (32 psi)

241 kPa (35 psi)

241 kPa (35 psi)

Not applicable

650/65R38 - 166D

186 kPa (27 psi)

214 kPa (31 psi)

200 kPa (29 psi)

228 kPa (33 psi)

207 kPa (30 psi)

Not applicable

AIR PRESSURE—R4038

Tire Size

Wet System

Dry System

27.4 /30.4 M (90/100 ft.) without Direct Injection (DI)

27.4 /30.4 M (90/100 ft.) with Direct Injection

36.5 M (120 ft.) without DI

36.5 M (120 ft.) with DI

200 cu. ft. Spreader

300 cu. ft. Spreader

IF320/105R46 - 166D

462 kPa (67 psi)

483 kPa (70 psi)

483 kPa (70 psi)

483 kPa (70 psi)

421 kPa (61 psi)

Not applicable

VF380/90R46 -173D

317 kPa (46 psi)

338 kPa (49 psi)

338 kPa (49 psi)

359 kPa (52 psi)

248 kPa (36 psi)

Not applicable

IF380/90R46 - 168D

400 kPa (58 psi)

441 kPa (64 psi)

441 kPa (64 psi)

462 kPa (67 psi)

338 kPa (49 psi)

Not applicable

IF420/80R46 - 167D

379 kPa (55 psi)

400 kPa (58 psi)

400 kPa (58 psi)

421 kPa (61 psi)

303 kPa (44 psi)

Not applicable

520/85R38 - 169A8 / B

310 kPa (45 psi)

338 kPa (49 psi)

338 kPa (49 psi)

359 kPa (52 psi)

276 kPa (40 psi)

Not applicable

620/70R38 - 170A8/B

290 kPa (42 psi)

310 kPa (45 psi)

290 kPa (42 psi)

330 kPa (48 psi)

241 kPa (35 psi)

Not applicable

650/65R38 - 166D2

269 kPa (39 psi)

283 kPa (41 psi)

283 kPa (41 psi)

283 kPa (41 psi)

221 kPa (32 psi)

Not applicable

Air Pressure—R4045

Tire Size

Wet System

Dry System

27.4 /30.4 M (90/100 ft.) without Direct Injection (DI)

27.4 /30.4 M (90/100 ft.) with Direct Injection

36.5 M (120 ft.) without DI

36.5 M (120 ft.) with DI

200 cu. ft. Spreader

300 cu. ft. Spreader

IF380/105R50 - 177D

427 kPa (62 psi)

455 kPa (66 psi)

441 kPa (64 psi)

469 kPa (68 psi)

359 kPa (52 psi)

441 kPa (64 psi)

VF420/95R50

310 kPa (45 psi)

331 kPa (48 psi)

331 kPa (48 psi)

352 kPa (51 psi)

276 kPa (40 psi)

324 kPa (47 psi)

480/80R50 - 176A8/B

448 kPa (65 psi)

469 kPa (68 psi)

462 kPa (67 psi)

476 kPa (69 psi)

414 kPa (60 psi)

469 kPa (68 psi)

620/70R46 - 176A8/B

283 kPa (41 psi)

296 kPa (43 psi)

289 kPa (42 psi)

303 kPa (44 psi)

283 kPa (41 psi)

345 kPa (50 psi)

710/60R46 - 178D

207 kPa (30 psi)

241 kPa (35 psi)

221 kPa (32 psi)

255 kPa (37 psi)

193 kPa (28 psi)

228 kPa (33 psi)

710/65R46 - 183D

193 kPa (28 psi)

228 kPa (33 psi)

200 kPa (29 psi)

241 kPa (35 psi)

172 kPa (25 psi)

207 kPa (30 psi)

IF800/55R46 - 175D

186 kPa (27 psi)

200 kPa (29 psi)

193 kPa (28 psi)

207 kPa (30 psi)

262 kPa (38 psi)

186 kPa (27 psi)

WIDTH
320/105R46	315 mm (12.4 in.)
320/90R50	315 mm (12.4 in.)
380/90R46	378 mm (14.9 in.)
380/105R50	378 mm (14.9 in.)
420/95R50	429 mm (16.9 in.)
420/80R46	429 mm (16.9 in.)
480/80R50	467 mm (18.4 in.)
520/85R38	528 mm (20.8 in.)
620/70R38	622 mm (24.5 in.)
620/70R46	622 mm (24.5 in.)
650/65R38	659 mm (25.9 in.)
710/60R46	719 mm (28.3 in.)
800/55R46	800 mm (31.5 in.)

OVERALL DIAMETER
320/105R46	1755 mm (69.1 in.)
320/90R50	1857 mm (73.1 in.)
380/90R46	1852 mm (72.9 in.)
380/105R50	2067 mm (81.4 in.)
420/80R46	1859 mm (73.2 in.)
480/80R50	2050 mm (80.7 in.)
520/85R38	1834 mm (72.2 in.)
620/70R38	1783 mm (70.2 in.)
620/70R46	2044 mm (80.5 in.)
650/65R38	1826 mm (71.9 in.)
710/60R46	2055 mm (80.9 in.)
800/55R46	2044 mm (80.5 in.)

CAUTION: Do not exceed the load capacity for the tires used and the maximum allowed homologated mass of the machine configuration as follows

• 18,100 kg (39,910 lb.) for R4030
• 18,800 kg (41,454 lb.) for R4038
• 23,900 kg (53,700 lb.) for R4045

ELECTRICAL SYSTEM
Battery Voltage	12 Volts
Battery Terminal Grounded	Negative
Alternator	200 amps, Voltage Regulated
Headlight Bulb	57M7166 (RE56964)
Sidelight Bulb	(GE888) (R136239)
Tail Light Bulb	Mfg. Type 1157 (AR48041)
Warning Light Bulb	Mfg. Type 1156 (AD2062R)
Cab Midbody	(GE9005) (R179326)
Field Light Bulb (Outer Floods and Platform Field)	(GE9005) (R179326)
Platform Fill Station	(GE862)
Cab Roof Side	(GE9005) (R179326)
Work Lamp (Front Hood)	(RE161588)
HID Light	(RE179974)

HYDRAULIC SYSTEM
Type	“Load Sensing” Pressure and Flow Compensated Closed Center
Pump	Axial Piston Type
Rated Working Pressure	Aux. pump margin on vehicle: 420—480 psi (difference between LS test port and P test port) Aux. pump high standby: 3000-3100 psi (P test port)

HYDROSTATIC SYSTEM
Type	Closed Loop
R4030 Pumps	Variable Speed Tandem Pumps 75cc
R4038 and R4045 Pumps	Variable Speed Tandem Pumps 100cc
R4030 Wheel Motors	Electrically Shifted, Variable Rate Displacement Front 60 cc Rear 60 cc
R4038 and R4045 Wheel Motors	Electrically Shifted, Variable Rate Displacement Front 80 cc Rear 80 cc
R4045 Wheel Motors	Electrically Shifted, Variable Rate Displacement Front 107 cc Rear 107 cc

27.4, 30.5, and 36.6 m (90, 100, and 120 ft.) Boom
Number of Sections	7, 9 and 11
Operation	Hydraulic Fold, Hydraulic Leveling
Type	Hydraulically Operated Arms
Operating Height	686—2197 mm (27—86.5 in.)
Transport Width	3.66 m (12 ft.)
Accumulator Precharge Pressure	6550 kPa (65.5 bar) (950 psi)

27.4, 30.5, and 36.6 m (90, 100, and 120 ft.) Boom Lifting Mechanism
Lifting Capacity	1315 Kg (2900 lb.)
Lift Cylinders
Quantity	2
Type	Double Acting

STEERING SYSTEM
Type	Hydrostatic
Relief Pressure	18 961 kPa (190 bar) (2750 psi)
Control	Steering Control Valve
Operation	Two Double Acting Cylinders
Turning Radius	9.2 m (30.2 ft.)

Item	Specification
CAPACITIES
Fuel Tank—R4030	515 L (136 gal.)
Fuel Tank—R4038 and R4045	586 L (155 gal.)
Diesel Exhaust Fluid Tank	29.5 L (7.8 gal.)
Cooling System w/Heater—6.8 L Final Tier 4/Stage IV Engine	29.4 L (7.75 gal.)
Cooling System w/Heater—6.8 L Tier 2/Stage II Engine	40 L (10.5 gal.)
Cooling System w/Heater—9.0 L Engine	40 L (10.5 gal.)
Crankcase (including filter)—6.8 L Final Tier 4/Stage IV Engine	26 L (27.5 qt.)
Crankcase (including filter)—6.8 L Tier 2/Stage II Engine	29 L (30.6 qt.)
Crankcase (including filter)—9.0 L Engine	31 L (32.8 qt.)
Hydraulic Reservoir—R4030	77.6 L (20.5 gal.)
Hydraulic Reservoir—R4038 and R4045	98.4 L (26 gal.)
Hydraulic System—R4030	189.3 L (50 gal.)
Hydraulic System—R4038 and R4045	208 L (55 gal.)
Final Drives (R4030) Each	1.2 L (1.3 qt.)
Final Drives (R4038) Each	1.7 L (1.8 qt.)
Final Drives (R4045) Each	2.5 L (2.6 qt.)

WEIGHT (EMPTY)
R4030 Base Machine (Less Solution System and Boom)	9,262 kg (20,376 lb.)
R4030 Base Machine With 27.4 m (90 ft.) Boom	13,550 kg (29,810 lb.)
R4030 Base Machine with 30.5 m (100 ft.) Boom	13,630 kg (29,986 lb.)
R4030 Base Machine with 36.6 m (120 ft.) Boom	13,890 kg (30,558 lb.)
R4038 Base Machine (Less Solution System and Boom)	9,673 kg (21,281 lb.)
R4038 Base Machine With 27.4 m (90 ft.) Boom	14,015 kg (30,833 lb.)
R4038 Base Machine with 30.5 m (100 ft.) Boom	14,090 kg (30,998 lb.)
R4038 Base Machine with 36.6 m (120 ft.) Boom	14,345 kg (31,559 lb.)
R4045 Base Machine (Less Solution System and Boom)	11,728 kg (25,860 lb.)
R4045 Base Machine with 27.4 m (90 ft.) Boom	16,068 kg (35,350 lb.)
R4045 Base Machine with 30.5 m (100 ft.) Boom	16,146 kg (35,521 lb.)
R4045 Base Machine with 36.6 m (120 ft.) Boom	16,400 kg (36,080 lb.)
Spreader Body (200 cu. ft. spreader)	1,651 kg (3,640 lb.)
Spreader Body (300 cu. ft. spreader)	1,696 kg (3,740 lb.)
Second Product Bin	454 kg (1,000 lb.)
Direct Injection Kit	250 kg (551 lb.)

SPRAYING SYSTEM
Tank
R4030 Capacity	3028 L (800 U.S. gal.)
Construction	Poly or Stainless Steel
R4038 Capacity	3785 L (1000 U.S. gal.)
Construction	Stainless Steel
R4045 Capacity	4542 L (1200 U.S. gal.)
Construction	Stainless Steel
Fill Opening	Top Lid or Quick Fill
Agitation	Jet
Pressure Strainer- (Standard)	50-Mesh
Pressure Strainer- (Standard)	80-Mesh
Fill Strainer- (Standard)	(3 in.) 20 Mesh
Hose	1379 kPa (13.8 bar) (200 psi) minimum rating
Machine	Two Braid
Boom	Two Braid
Rinse Tank—R4030 and R4038	454 L (120 gal.) Polyethylene
Rinse Tank—R4045	643 L (170 gal.) Polyethylene
Eductor	36 L (9.5 gal.)

SOLUTION PUMP
Type	Centrifugal
Drive	Hydraulic
Boom Maximum Flow Rate (276 kPa [2.7 bar] [40 psi])	Standard Pump and One Flowmeter—567.8 Lpm (150 gpm) High Flow Pump and Two Flowmeters—832.8 Lpm (220 gpm)
Boom Maximum Pressure (Dead Head Pressure)	Standard Flow Pump—1034.2 kPa (10.3 bar) (150 psi) High Flow Pump—930.8 kPa (9.3 bar) (135 psi)

BOOM SPRAY CONTROL VALVE
Type	Electric Valve
Operation	36.6 m (120 ft.) Boom—11 Section Switches 30.5 m (100 ft.) Boom—9 Section Switches 27.4 m (90 ft.) Boom—7 Section Switches
Pressure Control	Variable Pump Speed
Pressure Gauge	SprayStar Display

OPERATOR'S CAB (STANDARD)
Type	Air Conditioned With Air Suspension Seat
Radio	AM/FM Compact Disc Radio With Weather Band
Dome Light Bulb	Mfg. Type 93 (RE47095)
Sentry Light	(RE64231)
Air Filters	John Deere activated carbon cab air filters

AIR CONDITIONER
Make (compressor)	Denso
Refrigerant	R-134a
Freon charge	1.8 kg (4 lbs)

NOZZLES—27.4 m (90 ft.) BOOM
Standard:
SprayMaster (508 mm [20 in.] Spacing Off Center)	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	54
SprayMaster (381 mm [15 in.] Spacing On Center)	Five Turret High Flow Nozzle Bodies (Wet Boom)
Number of Nozzles	71
Installation	Factory
Optional:
SprayMaster Custom Spacing Kit	Five Turret High Flow Nozzle Body (Wet Boom)
Number of Nozzles	80
Installation	Dealership

NOZZLES—30.5 m (100 ft.) BOOM
Standard:
SprayMaster (508 mm [20 in.] Spacing Off Center)	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	60
SprayMaster (381 mm [15 in.] Spacing On Center)	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	79
Installation	Factory
Optional:
SprayMaster Custom Spacing Kit	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	80
Installation	Dealership
NOZZLES—36.6 m (120 ft.) BOOM
Standard:
SprayMaster (508 mm [20 in.] Spacing Off Center)	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	72
SprayMaster (381 mm [15 in.] Spacing On Center)	Five Turret High Flow Nozzle Bodies (Wet Boom)
Number of Nozzles	97
Installation	Factory
Optional:
SprayMaster Custom Spacing Kit	Five Turret Nozzle Body (Wet Boom)
Number of Nozzles	100
Installation	Dealership

SprayMaster NOZZLE BODY CHECK VALVES
Standard:
Green	83 kPa (.8 bar) (12 psi)
Optional:
Yellow	21 kPa (.2 bar) (3 psi)
Red	69 kPa (.7 bar) (10 psi)
Black	172 kPa (1.7 bar) (25 psi)