Fill Solution Tank with Nurse Tank Pump

1. CAUTION: Read carefully the directions printed on the chemical manufacturer's labels before handling chemicals, exposure to hazardous materials could cause injury or death.

   IMPORTANT: Do not add chemical to solution tank until just before field use. Follow the chemical manufacturer's instructions for mixing the spray solution to obtain the desired application rate and effect.

   CAUTION: Quik-Fill valve (A) can contain hazardous materials which can poison causing serious injury or death to you or others. Before removing Quik-Fill cap (B), verify Quik-Fill valve is closed.

   
   N98785-UN-12JUL13

   Side Quik-Fill

   
   N106681-UN-24SEP13

   A - Quik-Fill Valve

   B - Cap

   C - Solution Tank Sump Valve

   Verify Quik-Fill valve (A) is closed.

---




2. Open lock levers and remove cap (B).

3. Connect nurse tank fill hose to Quik-Fill adapter and close lock levers.

4. Open solution tank sump valve (C).

5. Open Quik-Fill valve and nurse tank valve.

6. NOTE: Operator must monitor solution tank content volume to prevent overfilling solution tank. When using an external pump source, the sight gauge may give erratic volume readings.  Therefore, a flowmeter is recommended to accurately monitor tank fill.

   Fill using nurse pump.

7. After solution tank has filled, shut down nurse tank pump and close nurse tank valve.

8. Close Quik-Fill valve and solution tank sump valve.

9. Remove fill hose from Quik-Fill adapter and replace cap.