Tread Adjust Calibration

IMPORTANT: Machine damage can occur to suspension and wheel assembly if tread width is adjusted when machine is not moving. Tread adjust is disabled if moving less than 1 km/h (0.6 mph) or over 8 km/h (5 mph).

This calibration should be performed when any of the following has occurred:

  • Tread Sensor has been replaced
  • Treads are not traveling to proper programmed spacing
  • Chassis control unit has been replaced
  • Chassis control unit memory has been reset to Factory Default

  1. N102644
    N102644-UN-04JUN13

    A - Calibration Softkey

    B - Vehicle Calibration Tab

    C - Calibration Icon

    Select the Calibration softkey (A) to view the calibration menu.


  2. Select the Vehicle Calibration tab (B).

  3. Select Calibration icon (C) next to Tread Adjust Calibration. Tread Adjust Calibration appears.

  4. N103139
    N103139-UN-10APR13

    N103140
    N103140-UN-10APR13

    A - Enter Button

    Follow instructions on first screen. When finished, select the Enter button (A).


  5. “Tread adjust calibration is complete.” is displayed. Press enter button (A) to return to Vehicle Calibration tab.

OUO6092,000097C-19-20150331