Metric Face Seal and O-Ring Stud End Fitting Torque Chart—Standard Pressures

N79757-UN-13FEB08

A - Stud Straight and Tube Nut

B - Bulkhead Union and Bulkhead Lock Nut

C - 90° Swivel Elbow and Tube Nut

D - 90° Adjustable Stud Elbow

E - Port Plug

F - Stud End

G - Tube Nut

H - Swivel Nut

I - Lock Nut

Metric Face Seal and O-Ring Stud End Fitting Torque Chart—Standard Pressure-Below 27.6 MPA (4,000 psi)
Nominal Tube OD Hose ID				O-Ring Face Seal or Tube Swivel Nut				Bulkhead Jam Nut Torque1			O-Ring Straight, Adjustable, and External Port Plug Stud Ends1
Metric Tube OD	Inch Tube OD			Thread Size	Swivel Nut Hex Size	Tube Nut or Swivel Nut Torque		Jam Nut Hex Size	Jam Nut Torque		Thread Size	Straight Hex Size2	Adj Lock Nut Hex Size	Steel or Gray Iron Torque		Aluminum or Brass Torque3
mm	Dash Size	in.	mm	in.	mm	N·m	lb.-ft.	mm	N·m	lb.-ft.	mm	mm	mm	N·m	lb.-ft.	N·m	lb.-ft.
4	-2	0.125	3.18	—	—	—	—	—	—	—	M8 x 1	12	12	8	6	5	4
5	-3	0.188	4.76	—	—	—	—	—	—	—	M10 x 1	14	14	15	11	10	7
6	-4	0.250	6.35	9/16-18	17	16	12	22	32	24	M12 x 1.5	17	17	25	18	17	12
8	-5	0.312	7.92	—	—	—	—	—	—	—	M14 x 1.5	19	19	40	30	27	20
10	-6	0.375	9.53	11/16-16	22	24	18	27	42	31	M16 x 1.5	22	22	45	33	30	22
12	-8	0.500	12.70	13/16-16	24	50	37	30	93	69	M18 x 1.5	24	24	50	37	33	25
16	-10	0.625	15.88	1-14	30	69	51	36	118	87	M22 x 1.5	27	27	69	51	46	34
20	-12	0.750	19.05	1-3/16-12	36	102	75	41	175	129	M27 x 2	32	32	100	74	67	49
22	-14	0.875	22.23	1-3/16-12	36	102	75	41	175	129	M30 x 2	36	36	130	96	87	64
25	-16	1.000	25.40	1-7/16-12	41	142	105	46	247	182	M33 x 2	41	41	160	118	107	79
28	—	—	—	—	—	—	—	—	—	—	M38 x 2	46	46	176	130	117	87
32	-20	1.250	31.75	1-11/16-12	50	190	140	50	328	242	M42 x 2	50	50	210	155	140	103
38	-24	1.500	38.10	2-12	60	217	160	60	374	276	M48 x 2	55	55	260	192	173	128
50	-32	2.000	50.80	—	—	—	—	—	—	—	M60 x 2	65	65	315	232	210	155