Fill Solution Tank without Quick Fill™ Valve

CAUTION: Read carefully the instructions on the chemical manufacturers labels before handling chemicals or you may be exposed to hazardous materials which could poison and injure you. Do not enter in the tank for cleaning or repair!

IMPORTANT: Do not add chemical to the tank until just before field use. Follow the chemical manufacturers instructions for mixing the spray solution to obtain the desired application rate and effect.

1. Open the solution tank cap.

2. Fill half of the solution tank with clean water.

3. Add the chemical concentrate.

4. Finish filling the tank with water.

CAUTION: Keep spray solution away from skin. If spray solution comes in contact with the body, wash it off immediately with clean water and detergent.