Fill Solution Tank with Nurse Tank Pump

CAUTION: Read carefully the directions printed on the chemical manufacturers labels before handling chemicals or you may be exposed to hazardous materials which could poison and injure you.

IMPORTANT: Do not add chemical to the solution tank until just before field use. Follow the chemical manufacturers instructions for mixing the spray solution to obtain the desired application rate and effect.

1. Check if Quick Fill™ valve handle (A) is in Closed position.

   
   N98370-UN-07MAY12

   A - Quick Fill™ Valve Handle

   B - Quick Fill™ Valve Cap

   C - Pressure Bypass/Rinse Valve Handle

   D - Suction Valve Handle

---




2. Remove the Quick Fill™ valve cap (B).

3. Connect the nurse tank fill hose to the Quick Fill™ valve.

4. Turn the pressure bypass/rinse valve handle (C) to Spray position.

5. Turn the suction valve handle (D) to Solution Tank position.

6. Close spray boom shutoff valve handle (A).

   
   N81772-UN-10JUN09

   A - Spray Boom Shutoff Valve Handle

---




7. Turn on the nurse tank pump and open the Quick Fill™ valve.

8. After solution tank has filled, close the Quick Fill™ valve.

9. Turn off the nurse tank pump.

10. Remove the fill hose from the Quick Fill™ valve and replace the cap.

11. Open the spray boom shutoff valve (A).