Operate Flow Divider (If Equipped)

The flow divider also provides extra tractive effort when needed. The difference between this system and the normal traction control is that the flow divider forces equal amounts of oil to each wheel motor.

When a wheel starts spinning out or the operator is in a situation where wheel spin is imminent, engage flow divider:

1. Shift speed range to the 1st or 2nd range.

2. 
   N97431-UN-13MAR12

   A - Flow Divider Switch

   Press flow divider switch (A).

---

NOTE: To engage the system, the hydraulic oil temperature must be below 93 ºC.

NOTE: The flow divider can be engaged while the machine is moving.

The flow divider is automatically disengaged:

• After 60 seconds of continuous operation.
• If the operator shifts to 3rd or 4th range.
• If the hydraulic oil temperature reaches 94 ºC.