Hydraulic Cylinder Safety Stop

causym CAUTION: When working under the corn head, always place the hydraulic cylinder safety stop in safety position to prevent header from lowering.

1. Start engine, raise feeder house and fully extend hydraulic cylinder to place safety stop in safety position.

2. (6620, 7720 and 8820 Combines) Disconnect support chain (A) from safety stop (B) and lower safety stop onto the cylinder rod.

3. (9400, 9500, 9600, 10 Series, and 50 Series Combines) Raise safety stop (A) from storage position and lower it down onto the cylinder rod.

After completing work on the corn head, place safety stop in storage position.

H70038


A-Safety Stop

JK22594,000025E -19-23JUL07-1/1