CAUTION:
Never lubricate or service corn head while combine engine is running. Turn off Engine, remove key, and set safety stops.
Lubricate with John Deere Multipurpose SD Polyurea High Temperature/Extreme Pressure lubricant or an equal SAE Multipurpose High Temperature Grease with Extreme Pressure (EP) performance at hours shown on the symbol.
Lubricate with John Deere SAE 30 oil or heavier oil at hourly intervals indicated on the symbols.
Lubricate with John Deere corn head grease (type "O" [zero] extreme pressure) at hourly intervals indicated on the symbols. The lubricant is available in a 0.4 kg (14-1/2 oz) tube AN102562. Wipe away all grease and dirt before removing inspection plugs. Wipe grease fittings clean before lubricating.
IMPORTANT:
Recommended service intervals are for average conditions. Service MORE OFTEN if corn head is operated under adverse conditions.
CAUTION:
Never lubricate or service corn head while combine engine is running. Turn off Engine, remove key, and set safety stops.
Lubricate with John Deere Multipurpose SD Polyurea High Temperature/Extreme Pressure lubricant or an equal SAE Multipurpose High Temperature Grease with Extreme Pressure (EP) performance at hours shown on the symbol.
Lubricate with John Deere SAE 30 oil or heavier oil at hourly intervals indicated on the symbols.