Adjusting and Leveling Gatherer Points

causym CAUTION: Raise corn head until points are off of the ground, shut off engine, and remove key.

Set one gatherer point to an appropriate height. Set remaining points to same height.

NS43404,000004D -19-19MAY08-1/2

1. Raise point (A) and lock latch (B).

2. Pull spring locking pin (C) and adjust height using location holes (D).

3. The points can also be fine adjusted by loosening jam nut (E) and adjusting cap screw (F) up or down.


A-Point
B-Latch
C-Locking Pin
D-Location Hole
E-Jam Nut
F-Cap Screw

H88971

NS43404,000004D -19-19MAY08-2/2