Every 1000 Hours of Operation

NOTE: Chopping corn head gear cases must be warm with header raised to drain and refill oil.

1. Drain and refill chopping gear case oil every 1000 hours.

2. Raise header and engage safety stop.

3. Place a proper container under machine. Remove drain plug (A) at the rear of the gear case and drain plug (B) at the front of the gear case.

4. After oil has drained reinstall plugs.

5. Remove check/fill plug (C) at the rear of the gear case and check/fill plug (D) at the front of the gear case. Add TY6296 80W 90 GL-5 Gear Lube to front and rear gear cases until level with the bottom of check/fill plug holes (C and D). Install plugs.

Specification

A-Rear Drain Plug
B-Front Drain Plug
C-Rear Check/Fill Plug
D-Front Check/Fill Plug

NS43404,0000054 -19-20MAY08-1/1